Free System Design Service

Surveillance Systems

Can the NVR-4 firmware update automatically instead of manually?

Asked By – On May 17, 2013 – With Comments Off

Currently this feature is not implemented in the NVR. To update the firmware, please contact Channel Vision Technical Support.

View Question

Does the Channel Vision NVR work with Nuuo products?

Asked By – On May 17, 2013 – With Comments Off

Currently no, that company is not supported, but integration may be done in the future.

View Question

My web server shows up on IP Installer, but won’t work in a browser (I see a black screen) how can I fix this?

Asked By – On May 17, 2013 – With Comments Off

1. Unplug power supply 2. Use a paperclip to push the button on the web server (reset button, if you cannot locate, check location using the manual) 3. Power on the unit, and keep holding the paperclip in for at least a full minute 4. Check IP installer, this will restore factory settings

View Question

What ONVIF version does the firmware version 0.40 for the 6521 support?

Asked By – On May 08, 2013 – With Comments Off

The 6521 will support the following ONVIF versions with the 0.40 firmware release. ONVIF 1.1 ONVIF 2.0 This setting is located on the bottom of the IP menu, in the settings menu of the camera. Security can be enabled or disabled from this menu as well.

View Question

What power supply do I use with a 6564?

Asked By – On April 11, 2013 – With No Answers

This is a 5017PS (12vDC 1000)

View Question

What power supply do I use with a 6543?

Asked By – On April 11, 2013 – With No Answers

This is a 5017PS (12vDC 1000)

View Question

Does the 6544 come with a heater?

Asked By – On April 11, 2013 – With No Answers

The 6544 does not currently have a heater option.

View Question

Can I use the DVR-83G with a HD-SD camera?

Asked By – On April 11, 2013 – With No Answers

This is not currently possible. the DVR-83G is designed for analog cameras.

View Question

How many mm is the lens in the 6403 camera?

Asked By – On April 11, 2013 – With No Answers

That lens is a 5.5 mm lens.

View Question

My 6721 PTZ camera won’t move, but I know it will spin because when I restart it it spins for a minute and stops

Asked By – On April 01, 2013 – With No Answers

1. Verify baud rate of camera on camera dipswitches and control device. 2. Verify Protocol of the camera, on dipswitches and control device. A common setting is Pelco P or Pelco D. 3. Verify the + and – wires going to the camera. If there is no voltage on them, the communication is broken in ...

View Question
Page 30 of 53